• Works on all generations of CDMA, TDMA, GSM and 3GSM
• Power control logic ensures maximum output power is within cellular standards
• Carrier-friendly installation switch assures proper antenna separation preventing oscillation
• Greatly increases signal strength inside your home, improving voice and data quality
• Allows for simultaneous use of multiple devices such as cell phones, notebooks and PDAs

Product Description
Wilson Cellular In-Vehicle Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. Wilson Cellular amplifiers are network-compatible and enhance the cellular phone user’s satisfaction without compromising the operation of the cellular system.

Mobile cell phone repeaters are great for use in urban areas where you are experiencing dropped calls and poor connections. For usage in rural areas where signal is worse, a direct connect (inline) cell phone amplifier will perform much better…. More >>

Wilson Electronics 801106 Wireless 60 dB Gain Amplifier / Repeater for buildi…

• Wilson Electronics 801245 Dual Dand 800/ 1900 MHz 50 db In-Building Wireless Dual-Band SOHO Cellular/PCS Amplifier
• Wilson Electronics 301124 Yagi 1800-1990 MHz PCS Antenna

Product Description
The Wilson Electronics 801245 SOHO Wireless Dual-Band Amplifier has been carefully engineered to enhance the performance of your cell phone or cellular data card in small office/home office applications. Its advanced technology is designed to significantly improve voice and data signal quality and reduce disconnects and drop-outs. The amplifier works with two antennas (sold separately): one antenna communicates with the cell site (the outside antenna) and the other communicates with your cell phone or laptop data card (the inside antenna).



PLUS



Wilson’s 15 dB 1900 MHz Yagi Antenna will collect the cell tower signal and send it through the cable to an amplifier or directly to the cell phone or cellular data card. When the cell phone or cellular data card transmits, the signal is transferred to an amplifier or directly to the antenna and broadcast back to the cell tower…. More >>

Wilson Electronics 801245 SOHO Cell Phone Signal Booster for Small Office or Home Office

• amplifier for 3g
• works at 2100 MHz
• for small areas

Product Description
AT4000 3G improves the 3G application services: mobile Internet access, wide-area wireless voice telephone, video calls and mobile TV, all in a mobile environment.

AT4000 3G wireless phone booster is very effective equipment that can offset the covering shortage of the base station of the mobile network, expand the coverage of the base station and fill the signal blind zone to ensure the convenient communication.

The model AT4000 of a 3G wireless phone booster can be used in a small private house, or other small area as an office, garage shop and etc. It’s indoor coverage is about 100 m2. The working frequency of the AT4000 3G wireless phone booster is 2100 MHz, AT4000 3G is practical, beautiful and easy to install…. More >>

AnyTone 3G Wireless Phone Booster AT4000

• Compatible with all cellular phones operating in the Cellular 800MHz (824MHz~894MHz) frequency band. System cover’s up to 2,500 sq. ft and operates up to 5 simultaneous callers.
• Voice Support: CDMA, TDMA, GSM, AMPS
• Plug and play operation, Easy D.I.Y. installation, and Maintenance free.
• Auto Level Control (ALC) and Auto Gain Control (AGC)
• Comply with FCC, CE, RoHS rules and regulations.

Product Description
RP800 Cell Phone Repeater System improves cellular reception and extends cellular coverage for homes and small offices. Repeater kit includes everything necessary for sucessful deployment: Bi-Directional Amplifier, Outdoor (donor) Panel Antenna, Indoor (service) Dipole Antenna, 33′ Low-Loss Coaxial cable, power supply, and user’s manual…. More >>

RP800 Cell Phone Repeater System for Verizon Wireless

• Color: Black, Connectivity Technology: Wired, Driver Size: 1.06299″, Driver Type: Mylar, Earpiece Controls: Volume, Earpiece Design: Over-the-head, Earpiece Type: Binaural, Maximum Frequency Response: 20kHz, Maximum Frequency Response: 18kHz, Microphone Controls: Mute, Microphone Design: Boom, Microphone Sensitivity: -62 dB, Microphone Technology: Noise Canceling, Minimum Frequency Response: 300Hz, Minimum Frequency Response: 20Hz, Operating Distance: 6ft, Sound Mode: Stereo
• Product Model: CCS 55222
• Sold as 1 each

Product Description
Stereo headset is lightweight and comfortable to wear for use with multimedia, gaming and telecommunications systems. Quality 27mm Mylar cone driver unit delivers full, rich, stereo sound. Noise-canceling boom microphone ensures clear communication in noisy environments. Headset offers in-line volume control, microphone mute switch, adjustable headband and 6 cord. Headphone frequency response is 20-2 kHz/20-11 kHz, and the microphone sensitivity (at 1 kHz) is 114dB/-59dB…. More >>

CCS55222 – Headset,Multimedia Stereo,w/Boom Microphone,6Cord,Black

• frequency is 1800 MHz
• for big buildings
• Amplifies cell phone signal

Product Description
AT6200 D mobile phone repeater is designed for middle-sized areas with very low signal. Its coverage is about 500 m2 it also has a frequency range 1800 MHz. AT6200 D is reliable within the climate zones with high temperature and humidity. It supports high up-link (1710-1785 MHz) and down-link frequency (1805-1880).

Mobile phone repeater AT6200 D is smart and light, easy for installation and with competitive price. The frequency of this amplifier is suitable almost for all European countries.

We sell only best amplifiers and AT-6200 D is not the exception…. More >>

Mobile Phone Repeater AnyTone AT6200 D

• Improves voice and data and signal quality for iDEN network including Nextel, Mike, Southern Linc and more
• Improves data communication rates needed for 3G technologies
• Transmits microwave energy to the outside of the antenna
• Greatly increases signal strength inside your home, improving voice and data quality
• Greatly reduces disconnects, drop outs, and noise

Product Description
The Wilson Cellular Direct-Connect Power Booster can increase your cellular phone coverage up to 50 miles. It will greatly reduce disconnects, drop outs and noise. It also eliminates all microwave energy radiating into your head. Your phone will use less battery power with the improved signal giving you longer talk and standby times. Use the Direct-Connect in your car, boat, RV, home or office…. More >>

Wilson Electronics 814003 In-Building & Mobile Cellular Direct Connection Amplifier with Carrying Case for iDEN networks

• Sold as 1 each

Product Description
Explorer 230 Bluetooth Headset works with most Bluetooth phones and offers a 33 range (10 meters). Contoured eartip fits in ear for comfort and enhanced sound quality. The omnidirectional microphone ensures excellent sound. QuickPair technology ensures it is easy to connect to any Bluetooth-enabled device. Simple to use with intuitive volume, call answer and call end controls. Headset features an LED to indicate incoming calls, missed calls and low battery. Slim and lightweight headset has an over-the-ear design. Battery supports up to 8 hours talk time. Uses lithium battery. Weighs 11 grams. Includes charger…. More >>

PLNEXPLORER230 – Bluetooth Headset, 7 Hour Talk Time, Black

• Color: Gray, Color: Silver, Connectivity Technology: Wireless, Earpiece Controls: Volume, Earpiece Controls: Call/Answer/End, Earpiece Design: Over-the-head, Earpiece Type: Binaural, Microphone Controls: Mute, Microphone Design: Boom, Microphone Technology: Noise Canceling, Operating Distance: 300ft, Product Model: CS361N, Product Series: SupraPlus, Standard Warranty: 1 Year
• Sold as 1 each

Product Description
Wireless Professional Headset System allows contact center supervisors who desire mobility answer or end calls while away from the workstation in unmatched comfort and with best-in-class audio quality. Combines the clarity of traditional corded technology with the mobility of wireless. Encourages hands-free productivity for employees. Lets contact center supervisors monitor agents and handle escalation cases up to 300′ from their desk phone. Designed for over-the-head comfort. Allows wearers to converse easily with coworkers without removing the headset (monaural design) or experience total-focus sound reduction (binaural design). Both the Voice Tube and Noise-Canceling microphone filter out excessive background sound. Built on digitally-encrypted DECT 6.0 technology…. More >>

Wireless Headset System,Binaural Dsgn,300′ Range,Silver/Gray, Sold as 1 each

• 2.5mm jack is compatible with cell phones (may require an adapter) and standard phones with a headset jack
• in line microphone
• includes adapter to work with audio devices with 3.5mm headset jack
• hearing aid must be t-coil equipped

Product Description
A lightweight hook rests next to your t-coil equipped hearing aid for increased sound clarity and speech comprehension…. More >>

NoiZfree One Monaural Hearing Aid Compatible Headset for Cell Phones